How to start working with leather on the cheap!

How to start working with leather on the cheap!

A leather working guide for beginners:

In this tutorial I will show you how to make an iPhone sleeve out of an old leather bag without having to buy many tools. It’s a starting point if you want to work with leather but you’re not sure if you want to spend hundreds of dollars on tools and materials.

Note: for in-depth hand sewing instructions, please check out my hand sewing tutorial.

The end result is this simple iPhone case:

Let’s get started:

DONE!

15 thoughts on “How to start working with leather on the cheap!

  1. If you have a steering wheel cover,and it is very thick, how can you stretch it, to put it on. Is there an oil,or liquid i could use to stretch it, to pull it on the steering wheel ?

    1. It’s most likely already sealed and treated, so I’m afraid that oils or water won’t penetrate it and make it stretch more. I don’t know if there is a way to make this go on much easier. Sorry

      1. Usage. Leather tends to stretch to fit – just don’t secure the ends of the tightening cords too firmly, you will hopefully have slack to take up once it settles on.

    2. there is a product called “shoe stretch” for stretching shoes that don’t fit quite right. It should work on finished leathers.

      1. hi sorry to bother you you seem to know a lot about Leather work.
        Can i ask could you advise what tools i need to get started i am disabled and very board stuck in day after day and would
        like to have a go at this i am not rich but can afford a few tools but am really interested
        Thanks

        1. Hi Kevin,
          it depends on what you’d like to make. You can start out with only a handful of tools (something to cut the leather, a couple of needles and some thread) and add more once you made a few things. If you’re having trouble with certain movements you might find it easier to cut leather with a rotary cutter. Using a stitching horse or stitching pony would also help to make it easier if you want to do a lot of sewing. Maybe you can find someone with a workshop who can help you to make one if you can’t buy one. There are plans available around the web. Hope that helps. Let me know if you’re stuck with anything and I’ll try and help out

    1. In this one I was using a generic PVA glue. You can use all kinds of contact adhesive, contact cement or similar. Most glues in a craft store will also do the job (check the label). I find that it’s cheaper to get them from the hardware store, though.
      Not sure about the sewing machine. I have seen people using a domestic machine for thin leather but I haven’t tried it. If you’re making something small, you could try hand sewing?

  2. Hey Attila, when creating something like this (a cover or wallet for an object), do you need to over compensate your piece of leather to fit around the edges?

    1. Hey Ben, yes, depending on the material and how tightly you want to fit the object, you’ll have to add a little extra around it. I don’t think there’s an easy one-size-fits-all answer for this one but I usually add a little extra (5-10mm) and trim around it before stitching. Using binder clips to work out where you want to stitch is a good way of testing how tight it’ll end up being. You could also stitch first and trim after. Usually the tension created by the material is enough to hold the object in place so it’s better to slightly oversize than having it too tight.

Leave a comment here